Instruction:
Check the instruction video via Computer.
1. Delete existing data: Press learning button 8 times. Response: LED flashes 7 times.
2. Learning remote code: press learning key once, twice or three times (see below).
LED turns on: learning mode is active. Press any button of the remote control.
LED indicator flashes three times: learning successfully completed.
3. Test: after the above operation , the receiver board can be controlled by the remote control .
More transmitters with different IDs can be learned and stored additionally, starting with step 2.
A mixture of different modes is possible.
Button usage (sets mode and starts pairing process):
Press Once: Inching mode (Momentary Mode)
Press Twice: self-Lock Mode (Toggle-Mode of the 4 Channels)
Press Three Times: interlocked mode (selected channel active and be cleared, if another channel becomes active)
Description Of Receiver Module:
Product Model:RX480E-4
Working Voltage: DC 3V-5V
Quiescent Current : ≤5mA
Output Current: 10 mA
Working Frequency: 433MHz
Receive Sensitivity: -108dB
Receive Distance: 15 meters above
Frequency Band: ±0.2MHz
Working Mode: inching, self-locking, interlocking
Description Of Transmitting Module:
Product Model: TX118SA-4
Working Voltage: DC 3V-24V
Transmitting Power: 11dbm
Distance: 25 meters above
Emission Current: 10MA
Rate of fire: maximum 10KB / S
Modulation: ASK
Encoding: Learning code EV1527
The specification information as follows:
The antenna’s core of conductor diameter (including the Antenna skin): 1.0mm, (except the Antenna skin): 0.5mm.
The wire length of weld end: 22.0mm, the wire length of antenna terminal: 21.0mm;
The diameter of antenna winding (including the Antenna skin):5mm;
The turn number of winding: 25 turns(Antenna for Receiver)
The turn number of winding: 21 turns(Antenna for Transmitter)
Both the receiving module and the transmitting module can be used.
Notice: Different options include different packages
Package List 1:
1* RX480E-4 Receiver Module
Package List 2:
1* TX118SA-4 Transmitter Module
Package List 3:
1* RX480E-4 Receiver Module
1* TX118SA-4 Transmitter Module
Package List 4:
1* RX480E-4 Receiver Module
1* TX118SA-4 Transmitter Module
2* Antenna for 433MHz
About Working mode:
Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
Learning the Code:(Momentary)
Press the learning key on the receiver once time, it comes into momentary setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
Learning the Code: (Toggle)
Press the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
Learning the Code:( Latching)
Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
For example: Button A = ON, Button B = OFF
Press the learning key on the receiver triple time, it comes into latching mode .
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Press the remote button A. LED flash for 5 times.
Press the remote button B. LED flash for 5 times
After 3 seconds, the LED indicator will be on again, learning successfully.
A = ON, B = OFF.
Follow us on: