Camllite ML-L3 MLL3 Infrared Remote Control for Nikon D40 D50 D60 D70 D80 D90 D3200 D5100 D5200 D7100 D7000 J1 V1 ML L3

Use Means
1.For the first time use. please pull out the plastic separator at the battery holder.
2.Mount the camera on a tripod or place the camera on a stable, level surface.
3.Press the button and rotate main command dial until(delayed remote) or(quick response remote)is displayed in the control panel.
4.Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors,make sure that the subject is not backlit and that the line of site between the transmitter and the infraed receiver is not blocked by the lens or other obstacles).
5.How the camera focuses and shoots depends on the option selected camera’s custom setting.For futher information,check your camera’s manual.
6.Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.

Commodity introduction:
it is  for Nikon D7000 D5100 D5000 D3000 D90 P6000 P7000 D60
It can trigger the camera shutter release remotely from a distance. The compatible camera has a built-in infrared receiver for this remote trigger device.
It has been proved to be safe and reliable with the multi-brand cameras (see more details in the picture above), and works with all camera remote control modes (Quick-response, Delayed and Bulb). Works from up to 8 meter (25 feet) away.