433mhz Universal Wireless 1 Button Remote Control Switch DC 12V 1CH Relay Receiver Module RF Transmitter 433 Mhz Remote Controls
Specifications Of The Transmitter:
Model Number : 8022 transmitter
Operating Frequency: 433MHz
Power by 3V Coin Cell Button Battery (Battery included )
Material: PVC
Button: 1 Button
Size: 59mm x 28mm x 8mm
Operating Voltage: 3V
Operating Current: 12mA
Transmitting Power: 10mw
Modulation Mode: ASK (AM)
Encoding Type: Learning
Transfers Distance: 20-50 meters.
Specifications Of The Receiver:
Model Number : KR1201-4
RF Working Mode: Superheterodyne Reception
Modulation Mode: ASK
Working Mode: Momentary, Toggle, Latching and Time Delay Mode.
Input Voltage: DC 10 ~ 14V
RF Frequency: 433MHz
Quiescent Current: 5mA
Receiving Sensitivity: >97dbm
Remote Control Range: >100m (Free Space).
Wired Connection Way: Fixed Wiring Pillar.
Decoding Mode:MCU Software Decoding.
Working Mode:Momentary, Toggle, Interlocked Mode Latching Time delay (5s ,10s ,15s ).
Wiring Diagram 1:
+V : 12V + (Input).
– V: 12V – (Input).
NO: Normal Open(Output).
COM:Common(Output).
NC: Normal Close(Output).
Color: Green (PCB Board), Black(Outside Shell)
Circuit Board Size: 3.5 * 3.0 * 1.8cm.
Notice: Different options include different packages:
Package 1 Included:
Only 1 Piece EV1527 Learning code Remote Control * 1pcs ;
Package 2 Included:
(Only 1 receiver) DC 12V 1CH Receiver module (KR1201 ) *1pcs ( include Shell );
Package 3 Included:
1 Pcs * Receiver module (KR1201) ( include Shell ),
1 Pcs * Remote Control (include battery );
Package 4 Included:
1 Pcs * Receiver module (KR1201) ( include Shell ),
2 Pcs * Remote Controls (include battery );
Free Gift:
Cross screwdriver * 1pcs.
Attention Please:
Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.
Clearing the code :
Keeping press the Learning Button on the receiver until the LED indicator ON and then flash,until it flash for several times. it mean the code have been cleared successfully;
After clearing the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time,
the LED will be on , it comes into momentary setting learning state mode.
Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off.
It means learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , the LED will be on , it comes into toggle setting learning state mode.
Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off.
It means learning successfully .
Learning the code 🙁 Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A .
LED flash for 5 times .
Push the remote button B .
Led flash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Learning the code 🙁 Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
Follow us on: