QIACHIP RF 433 Mhz 1527 Learning Code Wireless Remote Control Transmitter Module + 433.92Mhz DC 12V 24V Mini Receiver DIY Kit

Description Of Receiver Module:

Product Model:QA-R-011
Wide working voltage: DC 3.6V~ 24V
Maximum working current: 2A
Frequency: 433.92MHz
Output mode: voltage signal
Applicable chip: 1527
Working mode: jog, selflocking, interlocking

Description Of Transmitting Module:

Product Model: TX118SA-4
Working Voltage: DC 3V-24V
Transmitting Power: 11dbm
Distance: 25 meters above
Emission Current: 10MA
Rate of fire: maximum 10KB / S
Modulation: ASK
Encoding: Learning code EV1527

About Working mode:

Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.

Learning the Code:(Momentary)

Press the learning key on the receiver once time, it comes into momentary setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the Code: (Toggle)

Press the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the Code:( Latching)

Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
For example: Button A = ON, Button B = OFF
Press the learning key on the receiver triple time, it comes into latching mode .
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Press the remote button A. LED flash for 5 times.
Press the remote button B. LED flash for 5 times
After 3 seconds, the LED indicator will be on again, learning successfully.
A = ON, B = OFF.